ENVIRO FLOORS FLOW AID improving flow while reducing the surface tension
Enviro Floors Flow Aid is for use in improving the flow of any waterborne coating over a surface by reducing the surface tension.
Flow Aid also assists in greatly reducing rejection and the ‘quilting effect’ between blocks of parquetry or timber boards from the effect of surface tension reduction and flow and wetting enhancement.
Provides a major improvement in Rejection Resistance (craters and ‘fish eyes’), and Flow and Levelling (roller or applicator marks, ‘quilting’ effect especially on parquetry)
For use on older coatings that have lost some ‘wetting’ action.
When having to coat over unknown surfaces.
When low-level contamination from a surface is needed.
DIRECTIONS FOR USE:
Add 1 measure (25 ml) per 5 litres of coating material as a basic dosage. A maximum dosage
of 100 ml per 5 L can be used in major rejection situations. – however, verify adhesion is OK.
SHAKE WELL BEFORE USE. Failure to shake well can cause ‘pitting’ of the coated surface.
Note: whatever level is added into a coat, following coats will require that same level of
Overdosing can cause an orange peel effect.
You will need Adobe® Acrobat® Reader to view PDF documents. Click Download for a free copy from Adobe Website
Flow Aid Additive | Coating and Finish Additive